Address

Fyber Agency
Realtex House
2 Leeds Road
Rawdon
LS19 6AX

Phone & Email

Ask us!

Error: Contact form not found.

Closure Blocks

The Rackham Closure Blocks are quick and easy to lay

Request a quote

‘T’ shaped block profiled to fit between the beam bearing ends over the supporting wall, to avoid the need to cut blocks/bricks to size.

Closure blocks are available in four sizes (215mm, 440mm, 345mm and 540mm) all have a minimum compressive strength of 10N/mm2 and can be used with our ‘beam and block’ (215mm and 440mm) and TS (345mm and 540mm) flooring systems.

Manufactured in accordance with BS EN771-3 (Specification for masonry units – aggregate concrete masonry units. (Dense and lightweight aggregates)) with a minimum compressive strength of 10N/mm².

null

Ancillaries

View Ancillaries

We have a comprehensive range of ancillary products to complement both our Beam & Block and Poly-Plus flooring systems.

Vents & Air Bricks

Telescopic Cranked Underfloor Ventilators and Airbricks are used to ventilate the void beneath for floor.

View

Coursing Blocks

The Rackham Coursing Block can be used as a coursing aid. The coursing block should be placed on the foundation or trench block under the outer skin of the cavity wall.

View

Slip Bricks

A 385mm x 100mm block which can be used either below the beam ends or above the beam ends to assist in alignment of internal and external courses.

View

Ceiling Clips

Ceiling Clips to fit both the 175 mm and 225mm deep Rackham beams can be supplied, where required, to provide a fixing for timber battens to receive a plasterboard finish. The clips should be fixed after the flooring blocks have been positioned and before final grouting of the floor.

View

Get in Touch

Whether you need advice on which of our floor systems is best suited to your project, technical information, guidance on which bit goes where or just an estimate, please don't hesitate to get in touch.

Let's Build Together