Used to eliminate the need for aerated blocks around the perimeter of the floor. These abut to the inside face of the internal skin wall but must NOT form part of the wall.

100x440x1200mm.

Various Depths of 75mm and above. Laid over the beams and panels. 1200x2400mm.

1200x75x30mm polystyrene Edge Strips are laid around the perimeter of the floor on the inside of the inner leaf to prevent cold bridging.

Used at the end of the run of panels between the beam ends, over the supporting wall, to avoid the need to cut blocks/bricks to size. (Sold in packs of 60).

385x100x45mm are available, if required, sold in packs of 204.

Supplied in four colours, Terracotta, Buff, Blue/Black and Brown to complement the outer skin of brickwork. (The colours below are a guide only).

Used to ventilate the void beneath the floor and come with airbricks. Ventilators are available in standard 2-3 courses or extended 5-8 courses. The Extended Ventilator is usually used with deep insulated floor finishes, particularly EPS infill panels.